Zoom: dialing into a videoconference from an H.323/SIP device

Support Center > About SecureVideo Features

Published : Not Published

Page viewed 8312 times

Details

The H.323/SIP connector is available for an additional monthly fee, allowing participants to join a meeting from an H.323/SIP conference room system (e.g., Polycom, Cisco, Lifesize, and others). To request to a port, or to disable a port on your account, please contact our Sales Team at [email protected] . (This feature cannot be enabled on trial accounts.)

 

If you do not have an H.323/SIP device, but have a port enabled on your account and would like to test it, you can use an emulator like Polycom's RealPresense Mobile app.

 

Answer

 

 

Non-account holder

1. If you have been invited to a session with an invite, click on the link in that invite to get to the waiting room page. There will be a button called "Connect Using H.323". Click on it.

Dial Into Session button

 

2. The area will expand with the IP address you will need to connect to and the code (Zoom meeting ID) you will need. Once you dial into the IP address you will be prompted to enter the code and press the pound sign (#) to complete joining.

Dial in number and code

 

 

3. If the meeting has not started yet, please wait for the host.

 

 

Account holder (but not hosting session)

1. If you have been invited to a session and have an account, log in and go to your Dashboard. On the left-hand side of the session, there will be a button called "Connect Using H.323". Click on it.

"Connect using H.323" button

 

 

2. The area will expand with the IP address you will need to connect to and the code (Zoom meeting ID) you will need. Once you dial into the IP address you will be prompted to enter the code and press the pound sign (#) to complete joining.

IP address and code

 

 

3. If the meeting has not started yet, please wait for the host.

 

 

This article was last reviewed by our Support team on March 30, 2018.